DigiDesign FWx FireWire 매뉴얼 - 페이지 9
{카테고리_이름} DigiDesign FWx FireWire에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DigiDesign FWx FireWire 18 페이지.
페이지 인쇄Confirming FOH Rack FWx Card
Installation
After you have installed the FWx card in your FOH Rack, you
can confirm that you have installed it properly.
To confirm FWx card installation, do the following:
In the D-Show software, go to the Options > Devices page.
1
Confirm the FWx card's presence in your FOH Rack. When
2
successfully installed, the FWx card is detected and "FWx" is
shown on-screen in the lower right of the FOH Rack graphic.
FWx card indicated in the FOH Rack icon in the Devices page
If the FWx card is not displayed, power down the system
and check all cables and connections.
FWx
Chapter 2: Installing FWx 5