DigiDesign FWx FireWire Manuel - Sayfa 9
Kayıt Ekipmanları DigiDesign FWx FireWire için çevrimiçi göz atın veya pdf Manuel indirin. DigiDesign FWx FireWire 18 sayfaları.
Sayfayı YazdırConfirming FOH Rack FWx Card
Installation
After you have installed the FWx card in your FOH Rack, you
can confirm that you have installed it properly.
To confirm FWx card installation, do the following:
In the D-Show software, go to the Options > Devices page.
1
Confirm the FWx card's presence in your FOH Rack. When
2
successfully installed, the FWx card is detected and "FWx" is
shown on-screen in the lower right of the FOH Rack graphic.
FWx card indicated in the FOH Rack icon in the Devices page
If the FWx card is not displayed, power down the system
and check all cables and connections.
FWx
Chapter 2: Installing FWx 5