Epson ActionNote 890 설치 지침 - 페이지 4

{카테고리_이름} Epson ActionNote 890에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson ActionNote 890 9 페이지. Product support bulletin(s)
Epson ActionNote 890에 대해서도 마찬가지입니다: 조립 지침 (5 페이지), 카트리지 교체 (2 페이지), 프로그래밍 지침 매뉴얼 (12 페이지), 프로그래밍 지침 (1 페이지)

페이지 인쇄

(Picture A)

3. Unplug the power connector at the back of the printer (Picture A). This will prevent the

printer from "auto powering down", allowing you have as much time as you need to

complete the installation. Remove the cartridges as the below picture B shown.

Then use a small screwdriver to remove the original cover (Picture C)

(Picture A).

4. Open the black cap of the Reservoir bottle and fill ink into it one by one; please pay

attention to the color sticker on the Reservoir Bottles and fill ink according to the

sticker's color.

1) Pay attention to the direction guide on the Black cap and direction guide on the

Bottles, when the printer is working, make sure the two direction guides are on

the horizontal line to let the air in. In the case of leaking out ink, make them on the

vertical line when the printer stops working.

(Picture B)

(Picture C)