Epson ActionNote 890 Installatie-instructie - Pagina 4

Blader online of download pdf Installatie-instructie voor {categorie_naam} Epson ActionNote 890. Epson ActionNote 890 9 pagina's. Product support bulletin(s)
Ook voor Epson ActionNote 890: Montage-instructies (5 pagina's), Cartridges vervangen (2 pagina's), Handleiding programmeerinstructies (12 pagina's), Instructies voor programmering (1 pagina's)

(Picture A)

3. Unplug the power connector at the back of the printer (Picture A). This will prevent the

printer from "auto powering down", allowing you have as much time as you need to

complete the installation. Remove the cartridges as the below picture B shown.

Then use a small screwdriver to remove the original cover (Picture C)

(Picture A).

4. Open the black cap of the Reservoir bottle and fill ink into it one by one; please pay

attention to the color sticker on the Reservoir Bottles and fill ink according to the

sticker's color.

1) Pay attention to the direction guide on the Black cap and direction guide on the

Bottles, when the printer is working, make sure the two direction guides are on

the horizontal line to let the air in. In the case of leaking out ink, make them on the

vertical line when the printer stops working.

(Picture B)

(Picture C)