L-1000/LQ-500
DOT-MATRIX
Temperature:
Humidity:
Shock:
Vibration:
Printable area:
Approx. 100 msiline at l/&inch lrne
Paper feed speed:
spacing with intermIttent feeding;
2.2 inches/s wth continuous feeding.
Paper thickness:
Single sheets
Number of copies:
With contmuous multi-part paper only.
one onginal plus up to two copies.
(0.01 inches)
The
below shows the tlrmng tar the parailei lnteriace
L - 1 0 0 0 - 2
PRINTER
to 0.004 mchesl
0.065 to 0.1 mm 10.0025
to 0.01 Inches)
0.065 to 0.25 mm (O.W25
12/12/88
Ribbon:
Cartridge ribbon. available in black
only (#7753). Do not use ribbons for
9-pin printers.
Life expectancy (in Letter Quality
characters. at 48 dots/character):
2 million
MCBF:
For all components excluding print
head: 3 million lines
MTBF:
4000 power on hours
Print head life:
200 mdlion strokes per wre
Dimensions and weight:
Height: 5.5 inches 1139 mm)
Width : 15.3 inches 1390 mm1
Depth : 12.6 Inches (320 mm!
Weight: 15 lbs. (7 kg,
Electrical
Voltage:
120
Power consumption:
120 Watts maximum
Frequency:
49.5 to 50.5
Insulation resistance:
10 MR between AC power line and
c h a w s
120 V model can wtthstand 1.25 ki
Dielectric strength
l
720,240 V model can wthstand
l
3.75 kV rms applied tar one mmute
Printing enabled/disabled signals and control conditions
The table below shows the relatlonshlp between prmtmg bema
enabled or disabled. the on line/off lme status. and the receipt ot
the data on/&f control characters. DC1 or DC3.
'ON LINE SLCT IN DCl/DC3 ~ ERROR
DC1
acknowledged so that the printer can look for another DC1
character. whxh would
VAC 2 10%
Hz (50 Hz verslon~
to 00.5 Hz (60 Hz vewonl
BUSY
ACKNLG Printing
Enabled
Enabled
24 - Pin Printers