Epson ActionPrinter L-1000 Productinformatie - Pagina 2

Blader online of download pdf Productinformatie voor {categorie_naam} Epson ActionPrinter L-1000. Epson ActionPrinter L-1000 5 pagina's. Product support bulletin(s)
Ook voor Epson ActionPrinter L-1000: Product ondersteunings bulletin (3 pagina's), Product ondersteunings bulletin (4 pagina's), Product ondersteunings bulletin (8 pagina's), Product ondersteunings bulletin (20 pagina's), Product ondersteunings bulletin (18 pagina's), Product ondersteunings bulletin (4 pagina's), Product ondersteunings bulletin (7 pagina's), Product ondersteunings bulletin (6 pagina's), Product ondersteunings bulletin (2 pagina's)

Epson ActionPrinter L-1000 Productinformatie
L-1000/LQ-500
DOT-MATRIX
Temperature:
Humidity:
Shock:
Vibration:
Printable area:
Approx. 100 msiline at l/&inch lrne
Paper feed speed:
spacing with intermIttent feeding;
2.2 inches/s wth continuous feeding.
Paper thickness:
Single sheets
Number of copies:
With contmuous multi-part paper only.
one onginal plus up to two copies.
(0.01 inches)
The
below shows the tlrmng tar the parailei lnteriace
L - 1 0 0 0 - 2
PRINTER
to 0.004 mchesl
0.065 to 0.1 mm 10.0025
to 0.01 Inches)
0.065 to 0.25 mm (O.W25
12/12/88
Ribbon:
Cartridge ribbon. available in black
only (#7753). Do not use ribbons for
9-pin printers.
Life expectancy (in Letter Quality
characters. at 48 dots/character):
2 million
MCBF:
For all components excluding print
head: 3 million lines
MTBF:
4000 power on hours
Print head life:
200 mdlion strokes per wre
Dimensions and weight:
Height: 5.5 inches 1139 mm)
Width : 15.3 inches 1390 mm1
Depth : 12.6 Inches (320 mm!
Weight: 15 lbs. (7 kg,
Electrical
Voltage:
120
Power consumption:
120 Watts maximum
Frequency:
49.5 to 50.5
Insulation resistance:
10 MR between AC power line and
c h a w s
120 V model can wtthstand 1.25 ki
Dielectric strength
l
720,240 V model can wthstand
l
3.75 kV rms applied tar one mmute
Printing enabled/disabled signals and control conditions
The table below shows the relatlonshlp between prmtmg bema
enabled or disabled. the on line/off lme status. and the receipt ot
the data on/&f control characters. DC1 or DC3.
'ON LINE SLCT IN DCl/DC3 ~ ERROR
DC1
acknowledged so that the printer can look for another DC1
character. whxh would
VAC 2 10%
Hz (50 Hz verslon~
to 00.5 Hz (60 Hz vewonl
BUSY
ACKNLG Printing
Enabled
Enabled
24 - Pin Printers