Epson AcuLaser C4200 용지 걸림 매뉴얼 - 페이지 4
{카테고리_이름} Epson AcuLaser C4200에 대한 용지 걸림 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson AcuLaser C4200 4 페이지. Epson aculaser c4200dn: install guide
Epson AcuLaser C4200에 대해서도 마찬가지입니다: 설정 매뉴얼 (16 페이지)
Jam C A
11
Note:
When a paper jam occurs repeatedly at
the paper cassettes (Jam CA or Jam
CAB), jammed or crumpled paper may
still be inside the paper cassettes.
Remove the paper cassettes, then open
the green unit that is located on the top
part of the inside of the cassette slot, and
check whether any jammed paper is
there. Before reinstalling the paper
cassette, make sure to close the green
unit completely, otherwise you may
damage the printer.
Jam B
1
2
Note:
Be sure to remove the jammed paper by
pulling it upward.
Warning:
w
Be careful not to touch the fuser,
which is marked CAUTION HIGH
TEMPERATURE, or the
surrounding areas. If the printer
has been in use, the fuser and the
surrounding areas may be very hot.
3
Jam C A B
To clear the paper jam, first clear at
Jam CA, and then clear at Jam B.
Copyright© 2005 Seiko Epson Corporation. All rights reserved.
When transparencies are
jammed at the MP tray
Remove the paper from the MP tray
and remove any jammed paper. Open
cover A, check that no jammed paper
is left inside the cover, and close the
cover to clear the message on the LCD
panel. Then reload the paper. The
printer resumes printing from the
page that jammed.
Note:
❏ When using transparencies, load them
in the MP tray and set the Paper Type
setting to Transparency in the
printer driver.
❏ When the Paper Type setting in the
printer driver is set to
Transparency, do not load any other
type of paper except transparencies.
NPD1283-00