Epson AcuLaser C4200 Kağıt Sıkışması Kılavuzu - Sayfa 4

Yazıcı Epson AcuLaser C4200 için çevrimiçi göz atın veya pdf Kağıt Sıkışması Kılavuzu indirin. Epson AcuLaser C4200 4 sayfaları. Epson aculaser c4200dn: install guide
Ayrıca Epson AcuLaser C4200 için: Kurulum Kılavuzu (16 sayfalar)

Sayfayı Yazdır

Jam C A

Note:

When a paper jam occurs repeatedly at

the paper cassettes (Jam CA or Jam

CAB), jammed or crumpled paper may

still be inside the paper cassettes.

Remove the paper cassettes, then open

the green unit that is located on the top

part of the inside of the cassette slot, and

check whether any jammed paper is

there. Before reinstalling the paper

cassette, make sure to close the green

unit completely, otherwise you may

damage the printer.

Jam B

Note:

Be sure to remove the jammed paper by

pulling it upward.

Warning:

Be careful not to touch the fuser,

which is marked CAUTION HIGH

TEMPERATURE, or the

surrounding areas. If the printer

has been in use, the fuser and the

surrounding areas may be very hot.

Jam C A B

To clear the paper jam, first clear at

Jam CA, and then clear at Jam B.

When transparencies are

jammed at the MP tray

Remove the paper from the MP tray

and remove any jammed paper. Open

cover A, check that no jammed paper

is left inside the cover, and close the

cover to clear the message on the LCD

panel. Then reload the paper. The

printer resumes printing from the

page that jammed.

Note:

❏ When using transparencies, load them

in the MP tray and set the Paper Type

setting to Transparency in the

printer driver.

❏ When the Paper Type setting in the

printer driver is set to

Transparency, do not load any other

type of paper except transparencies.

NPD1283-00