Epson AcuLaser C8600 빠른 참조
{카테고리_이름} Epson AcuLaser C8600에 대한 빠른 참조을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson AcuLaser C8600 23 페이지. Epson aculaser c8600: specifications
Epson AcuLaser C8600에 대해서도 마찬가지입니다: 설정 매뉴얼 (44 페이지), 사양 (1 페이지)
페이지 인쇄
Control Panel Operation
The control panel is made up of three
elements: a liquid crystal display (LCD)
panel, indicator lights, and buttons. The
LCD panel and indicator lights tell you the
current status of the printer, and you can use
the control panel buttons to make printer
settings, check consumable products, and
print status sheets. However, settings made
in your application and in the printer driver
usually override settings made at the control
panel.
1
1
LCD panel
Displays printer status
messages and control panel
menu settings.
2
Up
Use these buttons to access
3
Enter
the control panel menus,
9
Down
where you can make printer
10
Back buttons
settings and check the status
of consumable products. For
instructions on how to use
each button, see "Using the
Control Panel Menus" in the
Reference Guide.
2 3
4
5
10 9
8
7
EPSON AcuLaser C8600 Quick Reference
4
Job Cancel
button
5
Start/Stop
button
6
6
Error light
(Red)
7
Ready light
(Green)
8
Data light
(Yellow)
Press once to cancel the
current print job.
Press down for more than
two seconds to delete all jobs
from the printer memory,
including jobs the printer is
currently receiving, saving to
the Hard Disk Drive, or
printing.
Switches the printer between
ready and offline status.
When the error light is
flashing, pressing this button
clears the error and switches
the printer to ready status.
On or flashes when an error
has occurred.
On when the printer is ready,
indicating that the printer is
ready to receive and print
data.
When the printer is not
ready, this light is off.
On when print data is stored
in the print buffer (the section
of printer memory reserved
for receiving data) but not yet
printed.
Flashing when the printer is
processing data.
Off when no data remains in
the print buffer.
Control Panel Operation (1/3)