Digiever DS-1200 Series 빠른 설치 매뉴얼 - 페이지 9

{카테고리_이름} Digiever DS-1200 Series에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digiever DS-1200 Series 16 페이지.

(2) 2.5-inch hard disks and SSD hard disks:

Please remove the two rails on both sides of the hard drive tray. Align the hard

drive with the 4 holes labeled 2.5" with the SATA connector facing outward.

While maintaining a grip on the hard drive and tray, turn the tray upside down

and secure the drive with four included M3 screws as demonstrated below.

④ Slide the disk tray onto the rails of the disk bay. Using the latch, gently push the

disk tray into the disk bay.

⑤ Secure the disk tray in place by pushing down on the latch. The latch should close

easily and snap in with an audible 'click'. Please make sure that the disk tray is

pushed all the way into the disk bay before attempting to secure the latch.

⑥ Return the front panel.