Digiever DS-1200 Series Snelle installatiehandleiding - Pagina 9

Blader online of download pdf Snelle installatiehandleiding voor {categorie_naam} Digiever DS-1200 Series. Digiever DS-1200 Series 16 pagina's.

(2) 2.5-inch hard disks and SSD hard disks:

Please remove the two rails on both sides of the hard drive tray. Align the hard

drive with the 4 holes labeled 2.5" with the SATA connector facing outward.

While maintaining a grip on the hard drive and tray, turn the tray upside down

and secure the drive with four included M3 screws as demonstrated below.

④ Slide the disk tray onto the rails of the disk bay. Using the latch, gently push the

disk tray into the disk bay.

⑤ Secure the disk tray in place by pushing down on the latch. The latch should close

easily and snap in with an audible 'click'. Please make sure that the disk tray is

pushed all the way into the disk bay before attempting to secure the latch.

⑥ Return the front panel.