Epson AL-M200 Series 설정 매뉴얼 - 페이지 28

{카테고리_이름} Epson AL-M200 Series에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson AL-M200 Series 40 페이지. Wireless network setup guide
Epson AL-M200 Series에 대해서도 마찬가지입니다: 설정 매뉴얼 (2 페이지)

페이지 인쇄

1. Installing Print Drivers on Computers

c Select Infrastructure, and then press the

d Select an encryption type, and then press the

Important:

Be sure to use one of the supported encryption methods to protect your network traffic.

6. Enter the WEP key or pass phrase, and then press the

Use the

When the encryption type is WEP, select a transmit key after entering the WEP key.

7. Wait a few minutes until the printer restarts to establish the wireless network.

8. Print a System Settings page from the operator panel.

For more information, see the User's Guide.

9. Confirm that "Link Quality" is shown as "Good", "Acceptable" or "Low" on the report.

Note:

When "Link Quality" is "No Reception", check if the wireless settings are correctly configured.

Auto Setup With the Access Point

If the access point such as a wireless router supports the WPS, security settings can be made

automatically.

WPS-PBC

Note:

WPS-PBC is a method to authenticate and register devices required for wireless configuration, by

pressing the button provided on the access point via wireless routers, and then performing WPS-PBC

setting on the operator panel. This setting is available only when the access point supports WPS.

1. On the operator panel, press the

2. Select Admin Menu, and then press the

3. Select Network, and then press the

button to enter the desired value, and press the

(Menu) button.

button.

AL-M200 Series

button.

Wireless Network Setup Guide

button to move a cursor.