Creda JETSPA CONTEMPORARY 설치 및 사용자 설명서 - 페이지 2

{카테고리_이름} Creda JETSPA CONTEMPORARY에 대한 설치 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Creda JETSPA CONTEMPORARY 6 페이지. Electric shower

페이지 인쇄
Section
Introduction . . . . . . . . . . . . . . . . . . . . . .
Important Safety Information . . . . . . . . . .
Assembly of Accessories . . . . . . . . . . . . . .
Additional Accessories and Common Parts . .
How to use your Jet Spa Shower (Detailed)

INTRODUCTION

Thank you for purchasing a quality Creda Jet Spa Shower manufactured in England.
To enjoy your new shower at its best, please take time to read this manual thoroughly to
familiarise yourself with all instructions, BEFORE beginning installation.
Having done so, keep this manual handy for future reference.
Your shower is designed to stabilise temperature changes caused by water pressure fluctuations.
These can result from toilets being flushed or taps being turned on and off.
When this happens your showering temperature will be held within a controlled band, provided that
the minimum pressure required by the shower is maintained (see "Effect of Other Water Devices").
If you experience any difficulty with the installation or operation of your new
shower, then please refer to the "What to do if things go wrong" section in this
manual before contacting us.

IMPORTANT SAFETY INFORMATION

1. Your shower has been designed for convenience, economy and safety of use, provided that it is
installed, used and maintained in good working order and in accordance with our instructions and
recommendations.
2. All wiring and installation must be supervised by a suitably qualified person.
3. THIS APPLIANCE MUST BE EARTHED.
4. The installation must be in accordance with the current edition of BS.7671 (the "IEE Wiring
Regulations") and "Part P" of the "Building Regulations" in force at the time of installation.
Installations outside of England and Wales must also conform to any local regulations in effect.
This appliance is intended to be permanently connected to the fixed electrical wiring of the mains
supply with its own dedicated supply.
5. This appliance must NOT be fitted where it may be subjected to freezing conditions.
6. DO NOT switch the appliance on if you suspect it of being frozen.
Wait until you are sure it has thawed out.
7. DO NOT fit any sort of tap or control on the appliance outlet. The appliance is designed to have
an open outlet and should only be used with "Creda" recommended fittings.
8. Take care to avoid restricting the outlet of the pressure relief device. If water is discharged from
the pressure relief device, maintenance will be required before the appliance can be safely used.
9. Isolate the mains electrical and water supply before removing the front cover of the appliance.
CONTENTS
Page
Section
2
What to do if things go wrong (1)
Self Help . . . . . . . . . . . . . . . . . . . . . . . . .
2
What to do if things go wrong (2)
3
Professional Service . . . . . . . . . . . . . . . . .
5
How your Jet Spa Shower Works . . . . . . . .
7
Creda After Sales Service . . . . . . . . . . . . .
7
Guarantee and Contact Details . . . . . . . . . .
7
How to use your Jet Spa Shower (Summary)
8
2
We offer a technical advisory service on the telephone to installers and other customers with
Page
problems in the field.
9
Remember to quote the exact type of shower, as written on the shower front and on is leaflet.
The model and serial number are located on the bottom face of the shower.
Make a note of those numbers here, and be sure to quote them if you call for advice.
9
10
Model Number: 53-67_ _ _ _ _ _ _ _ _ _ _ / Serial Number: _ _ _ _ _ _ _ _ _ _ _ _ _ _
Note: You may be charged for a service call if you do not have the serial number.
11
11
12
APPLIED ENERGY PRODUCTS LIMITED, MORLEY WAY, PETERBOROUGH PE2 9JJ
TEL: +44 (0) 1733 456789 / FAX: +44 (0) 1733 310606
CREDA AFTER SALES SERVICE
RING 0870 9000 430 (UK ONLY)
GUARANTEE AND CONTACT DETAILS
Website: www.creda-showers.co.uk
11