Epson C11C558001 - LQ 590 B/W Dot-matrix Printer 사용자 설명서 - 페이지 25

{카테고리_이름} Epson C11C558001 - LQ 590 B/W Dot-matrix Printer에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson C11C558001 - LQ 590 B/W Dot-matrix Printer 48 페이지. Epson lq-2090: product brochure
Epson C11C558001 - LQ 590 B/W Dot-matrix Printer에 대해서도 마찬가지입니다: 매뉴얼 (11 페이지), 기술 요약 (7 페이지), 사양 (2 페이지)

Epson C11C558001 - LQ 590 B/W Dot-matrix Printer 사용자 설명서
10. If you load paper in the
front slot, reattach the front
cover.
If you have the LQ-2090,
remove the sub cover from
the front cover before
replacing the front cover. Be
sure to reattach the sub cover
when you want to print from
a different paper source.
11. Turn on the printer.
12. Remove any slack in the paper by pressing the LF/FF button.
When the printer receives data, it will start printing at the current
position without advancing the paper. If necessary, adjust the top of
form position using the Micro Adjust function (see page 33).
Caution:
c
Never use the knob to adjust the top-of-form position; this may
damage the printer or cause it to lose the top-of-form position.
13. Attach the printer cover by inserting the front tabs into the slots,
then lowering the cover into place. Close the paper guide cover.
14. Send a print job to the
printer. The printer starts
printing from the
top-of-form position.
After you finish printing,
open the paper guide
cover and tear off the
printed document at the
perforation nearest the
paper exit slot.
Paper Handling
25