Epson C11C558001 - LQ 590 B/W Dot-matrix Printer 사용자 설명서 - 페이지 27
{카테고리_이름} Epson C11C558001 - LQ 590 B/W Dot-matrix Printer에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson C11C558001 - LQ 590 B/W Dot-matrix Printer 48 페이지. Epson lq-2090: product brochure
Epson C11C558001 - LQ 590 B/W Dot-matrix Printer에 대해서도 마찬가지입니다: 매뉴얼 (11 페이지), 기술 요약 (7 페이지), 사양 (2 페이지)
페이지 인쇄
1.
Make sure the paper guide is in the upright position. Then set the
paper-thickness lever to 0 if you are using ordinary single-sheet
paper. (If you are using envelopes, see "Envelopes" on page 30.)
2.
Move the paper release lever to the single-sheet position.
3.
Turn on the printer, if necessary.
4.
Slide the left edge guide
until it locks in place next
to the triangle mark on the
paper guide. Next adjust
the right edge guide to
match the width of your
paper.
5.
Load a sheet of paper with
the printable side down and
slide it down between the edge
guides until it meets
resistance. The printer feeds
the paper automatically and is
ready to print.
If the first printed line on your page appears too high or low, you can use
the Micro Adjust function to adjust the top-of-form position. See page 33
for more information.
Paper Handling
27