Epson C11C640001 - LX 300+II B/W Dot-matrix Printer 사용자 설명서 - 페이지 22
{카테고리_이름} Epson C11C640001 - LX 300+II B/W Dot-matrix Printer에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson C11C640001 - LX 300+II B/W Dot-matrix Printer 50 페이지. Epson lx-300: user guide
Epson C11C640001 - LX 300+II B/W Dot-matrix Printer에 대해서도 마찬가지입니다: 매뉴얼 (17 페이지)
페이지 인쇄
8.
Slide the left sprocket so its pins are aligned with the holes in the
paper and push the blue lock lever to lock the sprocket in place.
Then slide the right sprocket to match the width of your paper, but
do not lock it. Move the paper supports midway between the two
sprockets.
9.
Make sure your paper has a clean, straight leading edge. Open the
sprocket covers. Fit the first holes of the paper over the sprocket pins
and then close the sprocket covers. Slide the right sprocket to
remove any slack in the paper and then lock it in place.
Note:
Remove any remaining slack by gently pulling the paper from the back.
10. To separate the incoming paper from the printed paper, attach the
paper guide. Hold it horizontally and fit its notches over the
printer's mounting posts. Then slide the paper guide toward the
back of the printer until you feel it click.
11. Turn the paper feed knob to adjust the paper position. The
perforation between pages should be just above the print head.
12. Replace the printer cover but leave it open.
22
Paper Handling