Epson C11C640001 - LX 300+II B/W Dot-matrix Printer 매뉴얼 - 페이지 4
{카테고리_이름} Epson C11C640001 - LX 300+II B/W Dot-matrix Printer에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson C11C640001 - LX 300+II B/W Dot-matrix Printer 17 페이지. Epson lx-300: user guide
Epson C11C640001 - LX 300+II B/W Dot-matrix Printer에 대해서도 마찬가지입니다: 사용자 설명서 (50 페이지)
페이지 인쇄
Epson LX-300+II
Weight (not
multipart)
14 to 22 lb (52 to 82 g/m
Weight
(1 multipart
sheet)
12 to 15 lb (40 to 58 g/m
Binding
Spot-glued or crimp-bound on both sides
Continuous paper with labels:
bottom entry only
0.94 × 2.5 inches (23.8 × 63.5 mm) minimum;
Label size
0.1 inch (2.5 mm) corner radius
Backing sheet
Width
4 to 10 inches (101.6 to 254 mm)
Length
4 to 22 inches (101.6 to 558.8 mm)
Thickness 0.0028 to 0.0035 inch (0.07 to 0.09 mm)
Total
thickness
0.0063 to 0.0075 inch (0.16 to 0.19 mm)
Label weight 17 lb (64 g/m
Roll paper:
rear entry with optional roll paper holder only
Width
8.5 inches (216 mm)
Thickness
0.0028 to 0.0035 inch (0.07 to 0.09 mm)
Weight
14 to 22 lb (52 to 82 g/m
Paper Alignment
Printing starts at "0" on the scale. The unprintable area is to the
left of the "0".
4 - Epson LX-300+II
2
)
2
)
2
)
2
)
Printable Area
Single sheets and envelopes
A
Printable
area
A The minimum top margin is 0.17 inch (4.2 mm).
B The minimum left and right margins are 0.12 inch (3 mm).
The maximum paper width is 10.1 inches (257 mm).
The maximum printable width is 8 inches (203.2 mm).
If the paper size is substantially wider than this, the side margins
will be wider than the minimum, but the printable width does not
increase beyond 8.0 inches (203.2 mm).
C The minimum bottom margin is 0.17 inch (4.2 mm).
Continuous paper
A
A The minimum top and bottom margins above and below the
perforation are 0.17 inch (4.2 mm).
B The minimum left and right margins are 0.51 inch (13 mm).
The maximum paper width is 10 inches (254 mm).
The maximum printable width is 8 inches (203.2 mm).
If the paper size is substantially wider than this, the side margins
will be wider than the minimum, but the printable width does not
increase beyond 8.0 inches (203.2 mm).
7/06
B
Printable
area
B
C
A
Printable
area
B
B
A
B
C