Epson C203011-B - Stylus Color 3000 Inkjet Printer 빠른 설정 매뉴얼 - 페이지 8
{카테고리_이름} Epson C203011-B - Stylus Color 3000 Inkjet Printer에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson C203011-B - Stylus Color 3000 Inkjet Printer 21 페이지. Epson stylus color 3000: product information
Epson C203011-B - Stylus Color 3000 Inkjet Printer에 대해서도 마찬가지입니다: 브로셔 및 사양 (2 페이지), 매뉴얼 (13 페이지)
페이지 인쇄
Test the Printer
1. Turn off the printer and wait until the
off.
2. While holding down the
printer. Hold down the
seconds, then release it.
3. The first page prints on the first and last lines to measure
the page length. The next sheet prints character samples at
360 dpi (dots per inch). To stop the test, press the
button after the second page prints to stop the test.
4. Press the
Load/Eject
Then turn off the printer.
If you have any problems with the test, see Chapter 6 in your
User's Guide for more information.
Connect the Printer to Your
Computer
Depending on your system, you can connect the printer to your
computer using any of the following:
Parallel interface—for Windows
Parallel interface with the included USB-to-parallel cable—
for Windows 98 and above or Macintosh
Optional IEEE 1394 FireWire interface card (C823722)—
for Windows 2000, XP, and Macintosh
Optional 10/100 BaseT Ethernet interface card
(C12C823912)—network connectivity for all systems
In some cases, it may be to your advantage to use an optional
interface card instead of the built-in port.
8
Operate
button, turn on the
Load/Eject
button for three
Load/Eject
button to eject any loaded pages.
light turns
Pause