Epson C203011-B - Stylus Color 3000 Inkjet Printer Посібник з швидкого налаштування - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник з швидкого налаштування для Принтер Epson C203011-B - Stylus Color 3000 Inkjet Printer. Epson C203011-B - Stylus Color 3000 Inkjet Printer 21 сторінка. Epson stylus color 3000: product information
Також для Epson C203011-B - Stylus Color 3000 Inkjet Printer: Брошура та технічні характеристики (2 сторінок), Посібник (13 сторінок)
Друкувати сторінку
Test the Printer
1. Turn off the printer and wait until the
off.
2. While holding down the
printer. Hold down the
seconds, then release it.
3. The first page prints on the first and last lines to measure
the page length. The next sheet prints character samples at
360 dpi (dots per inch). To stop the test, press the
button after the second page prints to stop the test.
4. Press the
Load/Eject
Then turn off the printer.
If you have any problems with the test, see Chapter 6 in your
User's Guide for more information.
Connect the Printer to Your
Computer
Depending on your system, you can connect the printer to your
computer using any of the following:
Parallel interface—for Windows
Parallel interface with the included USB-to-parallel cable—
for Windows 98 and above or Macintosh
Optional IEEE 1394 FireWire interface card (C823722)—
for Windows 2000, XP, and Macintosh
Optional 10/100 BaseT Ethernet interface card
(C12C823912)—network connectivity for all systems
In some cases, it may be to your advantage to use an optional
interface card instead of the built-in port.
8
Operate
button, turn on the
Load/Eject
button for three
Load/Eject
button to eject any loaded pages.
light turns
Pause