3Com NJ205 - IntelliJack Switch 기능 설명서 - 페이지 7

{카테고리_이름} 3Com NJ205 - IntelliJack Switch에 대한 기능 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 3Com NJ205 - IntelliJack Switch 14 페이지. Virtual lans and traffic prioritization
3Com NJ205 - IntelliJack Switch에 대해서도 마찬가지입니다: 기능 설명서 (4 페이지)

페이지 인쇄

3 C O M

N J 2 0 5 I N T E L L I J A C K

Figure 5. Setting the outgoing and incoming tag

schemes assigns the PAN ports to one or more VLANs.

™

S W I T C H — V L A N S & T R A F F I C P R I O R I T I Z AT I O N

Setting Outgoing and Incoming Tag Schemes

Once the Port Associations have been set up, the PAN ports can be assigned to VLANs

using the appropriate VLAN ID (VID) numbers. The PAN-port VIDs can be any number

from 0 to 4095 and must match the core-switching VIDs, which are typically assigned

by the enterprise network management platform.

IMPORTANT: If any PAN port is configured with a VID that has no corresponding upstream match, the

entire switch may lose network connectivity. To reset the LAN port and recover network communications,

the NJ205 IntelliJack Switch must be connected to a hub or flat VLAN. It can then be reconfigured with the

proper VID using 3Com Central Configuration Manager.

1. Put a check the

Outgoing Tag Scheme

Note: This setting affects both VLAN and traffic priority sorting on a bridge-wide basis.

Port 1

2. Select the

tab and from the pull-down menu, select

untagged frame

3. Put a check in the

VLAN ID

are now configured as part of the "VLAN 1" subnet.

4. Repeat the last two steps to configure PAN ports 3 and 4 as part of the "VLAN 2"

subnet. Click

to exit configuration window.

5. Put a check in the

Incoming Tag Scheme

Note: This setting affects both VLAN and priority traffic sorting on a bridge-wide basis.

6. From the pull-down menu, select

7. Click

to exit configuration window.

box.

Add tag to any

box and type

in the

VLAN ID

box.

Frames received are unmodified

field. PAN ports 1 and 2