Aydin Displays VFP19R2-000-607 사용자 설명서 - 페이지 5
{카테고리_이름} Aydin Displays VFP19R2-000-607에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aydin Displays VFP19R2-000-607 14 페이지. Rugged vfp19-inch flat panel display
페이지 인쇄The socket-outlet of power supply shall be installed near the equipment and shall be easily accessible.
♦
Follow all warnings and instructions marked on the display.
♦
Do not attempt to service this display yourself. There are no user replaceable parts inside and removing
♦
the display cover or back will expose you to dangerous voltage or other risks. Refer all servicing to
qualified service personnel.
Adequate ventilation must be maintained to ensure reliable and continued operation and to protect the
♦
display from overheating. Do not block ventilation slots and openings or install the display in a place
where ventilation may be hindered.
To protect from electrical shock, unplug the display's power supply from the wall outlet before
♦
relocating.
Do not expose this display to direct sunlight or heat. Hot air may cause damage to the cabinet and other
♦
parts.
This display should be operated from the type of power source indicated on the display's rating label.
♦
Do not allow metal pieces or objects of any kind to fall into the display through the ventilation holes.
♦
The inside of the fluorescent tube located within the LCD monitor contains mercury. Please follow the
♦
bylaws or rules of your municipality to dispose of the tube properly.
Do not use this display near water.
♦
Do not place any heavy objects on the power cord. Damage to the cord may cause shock or fire.
♦
When operating the LCD monitor with its AC 220-240V power supply; use a power cord that matches
♦
the power supply voltage of the AC outlet being used. The power supply cord you use must have been
approved by and comply with the safety standards of your country.
In UK, use a BS-approved power cord with molded plug having a black (5A) fuse installed for use with
♦
this monitor.
Unplug this display's power supply from the wall outlet and refer servicing to qualified service
♦
personnel in the event that:
Document No. 150-VFP9-104 Rev. (A)
PRODUCT SAFETY PRECAUTIONS
Power cord or plug is damaged or frayed.
Liquid is spilled into the display or the display is exposed to rain or water.
The display does not operate normally when the operating instructions are followed.
The display has been dropped or the cabinet damaged.
The display exhibits a distinct change in performance, indicating a need for service.
5