Digiflex RF159 설치 관리자 참조 설명서 - 페이지 4

{카테고리_이름} Digiflex RF159에 대한 설치 관리자 참조 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Digiflex RF159 8 페이지. 2 channel smart rf controller - 433mhz

페이지 인쇄

Learning Keyfobs

A total of 250 keyfobs can be learnt, for example you can have 250 different keyfobs operating RLY1 or RLY2. You

can also spread the 250 keyfobs across both RLY1 and RLY2 using different buttons. The same keyfob can not be

programmed to operate the same relay using 2 different buttons. If a keyfob button is already learnt to RLY1 and you

learn a different button on the same Keyfob to RLY1 then the original button is overwritten by thew new button.

While learning keyfob buttons to the relays you can easily learn one keyfob to RLY1 then learn a different button to

RLY2 after each other and then learn new keyfobs after each other.

Action

Enter Keyfob

Learn Mode

Selecting The

Relay

Learn Keyfob

Button to Relay

Exit Programming

Mode

Receiver LED Indicators

The RF159 2 Way Output Module includes RED and GREEN LED indicators which provide visual feedback during sys-

tem operation. See Table 3 for information on the indicator colours and meanings.

Lable

LED Colour

RLY1

Red

RLY2

Red

Green

PGM

Red

Page

P/N: RF159IRG Rev 1.3



Learning a Keyfob

Steps

Press RLY1 and RLY2

for 1 second

Press Relay Button To

Select (E.g. RLY1)

Press desired keyfob

button to learn

To program another keyfob or button go to step 2.

Press RLY1 and

RLY2 for 1 second or

timeout after

60 seconds

LED Legend

Fast Flash

Table 2: RF159 Keyfob Programming

LED Indicators

Purpose

RLY1 Operation /

Programing

RLY2 Operation /

Programing

Packet Receive /

Transmit / Power

Programing Mode

Table 3: RF159 Device LED's

LED's

RX: ON

PGM: ON

RLY1: Flash

RLY2: Flash

RX ON

PGM ON

RLY1: ON

RLY2: OFF

RX: Acknowledged with a singal

pulse

PGM: ON

RLY1: Flash

RLY2: Flash

RX: ON

PGM: OFF

RLY1: OFF

RLY2: OFF

Slow Flash

Steady On

Steady

OFF

Red

Green

In programming mode with either a 50/50 blink or solid

on as well as flashes on when the relay is operated.

In programming mode with either a 50/50 blink or solid

on as well as flashes on when the relay is operated.

Indicates power on the module and receive/transmit

data packets.

Blinks each time the system is polled by the control

panel.

RLY1

PGM

RLY1

PGM

RLY1

PGM

RLY1

PGM

Meaning

E&OE

RLY2