Digifly Archimede 사용자 설명서 - 페이지 11

{카테고리_이름} Digifly Archimede에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Digifly Archimede 20 페이지.

Press the right arrow key

values are shown:

Temperature / Pressure./ Air Speed

The ambient temperature reading can be shown in metric (°C) or imperial (°F) units. To

change the units of display, go to the main setup menu page by pressing the

(function "MEN"), select the "MAIN SETUP" menu and go (M-SET \ n. 24 U-TE).

Note: temperature sensor is inside the instrument and takes several minutes to reach

the external temperature. Differences in readings of about 1° or 2° are normal.

It is possible to adjust the temperature indication, go to (MAIN SETUP \ n. 25 KTMP).

4.5

PRESSURE DISPLAY

The pressure can be shown on the BASIC/ADVANCED DISPLAY screen.

To display the barometric pressure press the

To recalibrate the barometer, go to (M-SET \ n. 12 KBAR)

Attention: Incorrect re-calibration makes the readings of the barometer & the altimeters

less accurate.

4.6

To display your air speed, you must have an air speed probe

connected. The optional air speed probe should be plugged in to

the right hand socket on the bottom of the vario.

The air speed reading can be shown in metric (km/h) or imperial (mph) units. To change

the units of display, go to (M-SET \ n. 23 U-SP) menu & then change to "MHP" or "KMH".

The airspeed can be shown on the BASIC/ADVANCED DISPLAY screen.

To display the air speed press the

To activate the stall alarm function, you must have an air speed probe connected. The

optional air speed probe should be plugged in to the right hand socket on the bottom of

the vario. It is possible to adjust the value that visual and acoustic the stall alarm is

activated. Go to (M-SET \ n. 9 STAL). Enter the value in km/h.

If the air speed probe is showing inaccurate readings, it is possible to recalibrate the air

speed probe, go to (M_SET \ n. 11 KIAS). An adjustment (in %) of the air speed reading

can be made, (100% = no adjustment, 110% = increase, 90% = decrease).

to switch between the functions. In sequence the following

key.

Page 11

key.

key