Archon WD2010H 설치, 운영 및 유지보수 지침 매뉴얼 - 페이지 3

{카테고리_이름} Archon WD2010H에 대한 설치, 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Archon WD2010H 16 페이지. Washdown stations

INSTALLATION/OPERATION/MAINTENANCE INSTRUCTIONS FOR

ARCHON MODELS WD2010L, WD2010, WD2010H WASHDOWN STATIONS

C. Application Data: Recommended Operating Ranges

Model

Saturated Steam Pressure

WD2010L

WD2010

WD2010 H

Maximum water discharge temperature should be limited to 190° F.

Note: For specific application data within the above ranges, consult the Archon product proposal or request Archon

to supply the applicable Technical Data Bulletin.

DANGER: Never exceed these design ratings or application data limits.

Exceeding these limits can cause serious personal injury and/or property

damage. The hot water coming out of the unit may flash to steam if the

outlet temperature reading is more than 190° F. The washdown units should

never be used for temperatures exceeding 190°F.

DANGER: Archon WD2010 washdown stations are designed as systems.

Operation without hose and approved nozzle to provide back pressure can

result in personal injury to personnel and damage to property. Consult the

factory for optional installation instructions.

II.

INSPECTION AND PERFORMANCE CONFIRMATION:

A. Receiving Inspection

Upon receipt of washdown station, check all components carefully for damage incurred in shipping. If damage is

evident or suspected, do not attempt installation. Notify carrier immediately and request damage inspection.

(psig)

10-60

35-150

60-200

DANGER

Water Pressure

(psig)

30-80

Discharge flow range

3.0 to 4.5 GPM

5.5 to 8.5 GPM

6.5 to 9.0 GPM

Installation: 1004 Rev 4

Issued: February 7, 2013