Digigram PCX-IP LW881e 사용자 설명서 - 페이지 12

{카테고리_이름} Digigram PCX-IP LW881e에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Digigram PCX-IP LW881e 20 페이지. Professional multichannel sound cards with livewire connectivity

페이지 인쇄

Removing the driver

Open the Windows Control Panel and doubleclick on the Add/Remove Software icon or Programs and Features icon, depending on

the Windows flavour.

●

Select "Digigram HR Runtime ...", and Change/Remove.

●

Select Remove in the HR Runtime window.

●

Follow the instructions to finish to remove the driver.

HOW TO CHECK THE INSTALLATION

Once the card and the driver have been installed according to the procedure described in this manual, you can check that the PCX card

is properly installed and works fine as follows.

●

From <Start> <Programs> <Digigram>, select <Digigram Control Center>.

●

Select the 'General Information' tab.

In the "Modules Information" window, you can see the HR Runtime modules that have been installed, and their versions.

●

Select the 'Diagnostics' tab to display the installed card(s).

If the card is not displayed:

●

Make sure that during the HR runtime installation the "Driver for the HR boards" has been selected in the "Select components"

window.

●

Open the Windows Device Manager (from Control Panel, System). The card should be listed in "Sound" or "Sound, video, and

games" controllers. If it is listed with no warning symbol, the card is well recognized by the system. In case there is a warning

symbol : make sure that the card is correctly inserted in the PCI slot, and screwed on the PC chassis.

●

If necessary, uninstall the HR runtime package as described in this manual, and reinstall it.

If the card is displayed:

●

Right click on the icon of the card.

●

Select 'Diagnostics', and 'Play Sine'. This plays in loop a sine signal on all the output channels of the card. You can also select

'Play file' to play in loop a file of your choice (PCM only).

If the playback is correct, the card is correctly installed and works.

●

To stop the playback, right click on the card icon, and select 'Stop Activities'.

The DirectSound devices associated to the card are displayed from the Windows Control Panel, Sound.

●

Select tab "Audio", Default device (Playback device, Recording device).

Available DirectSound devices that can be selected from a DirectSound application are:

DirectSound playback devices

PCX-IP LW881e, PCX-IP LW1221e

DirectSound recording devices

User's manual