Digigram PCX-IP LW881e Manual do utilizador - Página 12
Procurar online ou descarregar pdf Manual do utilizador para Placa de som Digigram PCX-IP LW881e. Digigram PCX-IP LW881e 20 páginas. Professional multichannel sound cards with livewire connectivity
Imprimir página
Removing the driver
Open the Windows Control Panel and doubleclick on the Add/Remove Software icon or Programs and Features icon, depending on
the Windows flavour.
●
Select "Digigram HR Runtime ...", and Change/Remove.
●
Select Remove in the HR Runtime window.
●
Follow the instructions to finish to remove the driver.
HOW TO CHECK THE INSTALLATION
Once the card and the driver have been installed according to the procedure described in this manual, you can check that the PCX card
is properly installed and works fine as follows.
●
From <Start> <Programs> <Digigram>, select <Digigram Control Center>.
●
Select the 'General Information' tab.
In the "Modules Information" window, you can see the HR Runtime modules that have been installed, and their versions.
●
Select the 'Diagnostics' tab to display the installed card(s).
If the card is not displayed:
●
Make sure that during the HR runtime installation the "Driver for the HR boards" has been selected in the "Select components"
window.
●
Open the Windows Device Manager (from Control Panel, System). The card should be listed in "Sound" or "Sound, video, and
games" controllers. If it is listed with no warning symbol, the card is well recognized by the system. In case there is a warning
symbol : make sure that the card is correctly inserted in the PCI slot, and screwed on the PC chassis.
●
If necessary, uninstall the HR runtime package as described in this manual, and reinstall it.
If the card is displayed:
●
Right click on the icon of the card.
●
Select 'Diagnostics', and 'Play Sine'. This plays in loop a sine signal on all the output channels of the card. You can also select
'Play file' to play in loop a file of your choice (PCM only).
If the playback is correct, the card is correctly installed and works.
●
To stop the playback, right click on the card icon, and select 'Stop Activities'.
The DirectSound devices associated to the card are displayed from the Windows Control Panel, Sound.
●
Select tab "Audio", Default device (Playback device, Recording device).
Available DirectSound devices that can be selected from a DirectSound application are:
DirectSound playback devices
12
PCX-IP LW881e, PCX-IP LW1221e
DirectSound recording devices
User's manual