Accurion i4 Series 사용 설명서 - 페이지 10
{카테고리_이름} Accurion i4 Series에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Accurion i4 Series 14 페이지. Active vibration isolation halcyonics workstation
페이지 인쇄Specifications
Available Standard Versions
Workstation_i4
Workstation_i4large
Performance Specifications
Isolation technology:
Force directions:
Isolation performance:
Active bandwidth:
Settling time:
Stroke of the actuator:
Max. correction forces:
Load capacity:
Other Specifications
Dimensions:
Weight:
Table top material:
Top plate surface flatness:
Max. compensation level:
Repeatability of load
adjustment:
Environmental and Operational Requirements
Electrical voltage:
Power consumption:
Operating temperature:
Operating humidity:
Operating altitude:
Certification
Electrical safety:
EMC:
*
Floating table top is supported by steel springs; low-pass characteristics of spring-mass combination
dominates the dynamic behaviour above 200 Hz.
** The settling time and maximum compensation level depend on several conditions, such as payload, fre-
quency, load distribution and height of the payload. Therefore this value should be considered as an estima-
tion.
Accurion control technology based on piezoelectric type acceleration pickup,
fast signal processing and electro-dynamic type force transducers
Active compensation in all six degrees of freedom
> 5 Hz = 25 dB (94.4%); >10 Hz = 40 dB (99.0%)
0.6 – 200 Hz*
300 ms**
1000 µm
Vertical ± 8 N; horizontal ± 4 N
WS_i4: 0 – 120 kg (0 - 265 lbs) / WS_i4large: 0 - 105 kg (0 - 231 lbs)
See page 11-12
Workstation_i4: 115 kg (254 lbs)
Workstation_i4large: 135 kg (298 lbs)
Active isolated surface: powder coated aluminium
Surrounding surface: melamine-phenolic resin
± 0.10 mm over complete surface
500 µm/s at 6 Hz and with a load of 60 kg (132 lbs)**
120 µm
100 - 240 V AC/47 – 63 Hz
130 W
10 – 40°C (50 – 104 F)
0 – 60%
< 2500 m (8100 ft)
CE certificated according to the directive 2014/35/EU
CE certificated according to the directive 2014/30/EU
- 10 -