DigiGrid MGO 사용자 설명서 - 페이지 16

{카테고리_이름} DigiGrid MGO에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DigiGrid MGO 19 페이지.
DigiGrid MGO에 대해서도 마찬가지입니다: 사용자 설명서 (15 페이지)

3. MGB/MGO CONTROL PANEL

If you are working with MultiRack SoundGrid, access the MGB/MGO Control Panel via the Inventory window.

If you are using SoundGrid Studio, click on the Gear symbol in the device slot to open the MGB/MGO Control Panel.

When you launch the DiGiGrid MGB/MGO driver Control Panel, it will load the Clock page. The following settings are available in the

Clock Settings window:

■ SOURCE sets the clock source.

Pressing the "Hardware Control Panel" button on the Driver Control Panel app will

open the control panels of all I/O devices assigned to your SoundGrid application. If

none are assigned, nothing will happen.

The Driver Control Panel app is located here:

PC: C:\Program Files (x86)\Waves\SoundGrid\Driver Control Panel

Mac: System HD/Applications/Waves/SoundGrid

- Internal: The interface itself provides the clock.

- External WC: The interface has a Word Clock Input

connector

to connect an external clocking source in order to

sync all devices in your network to the external clock.

- Sync over Ethernet: Send or receive word clock/

sample rate over an Ethernet cable between DiGiGrid

network devices.

- Digital: Syncs via the BNC or optical MADI

connection on MADI Port 1 or Port 2 (selectable).

The MGB/MGO interfaces sync to the incoming MADI

from the console.