Creo Trendsetter 800 시각적 빠른 참조 - 페이지 6
{카테고리_이름} Creo Trendsetter 800에 대한 시각적 빠른 참조을 온라인으로 검색하거나 PDF를 다운로드하세요. Creo Trendsetter 800 9 페이지.
페이지 인쇄Trendsetter 400/800
!
WARNING: Remove air pressure from the
device before replacing an air filter.*
5 micron filter
0.01 micron filter
part number
part number
55-0760
55-0759
1
Disconnect the compressed air.
Air pressure
drops to 0 psi.
* Refer to the Operator Manual for full details.
Replacing the 5 Micron Filter
Pull the filter tab down, rotate
2
the bowl a quarter turn (either
direction), and pull down.
Remove the old
3
filter and Install the
new one.
Tab
Bowl
Replacing the 0.01 Micron Filter
Pull the filter tab down, rotate
2
the bowl a quarter turn (either
direction), and pull down.
Remove the old
3
filter and Install the
new one.
Tab
Bowl
4
Clean inside the bowl.
Replace the O-ring,
5
if necessary.
6
Reattach the bowl.
5 micron filter
4
Clean inside the bowl.
Replace the O-ring,
5
if necessary.
6
Reattach the bowl.
0.01 micron filter
0.01 micron filter
0.01 micron filter
Replacing the Air Supply Filters
7
Turn on the compressed air.
Air pressure rises to 80 psi.
5