Creo Trendsetter NEWS SA 시각적 빠른 참조 - 페이지 6
{카테고리_이름} Creo Trendsetter NEWS SA에 대한 시각적 빠른 참조을 온라인으로 검색하거나 PDF를 다운로드하세요. Creo Trendsetter NEWS SA 9 페이지.
페이지 인쇄Trendsetter NEWS SA
!
WARNING: Remove air pressure from the
device before replacing an air filter.*
5 micron filter
0.01 micron filter
Air supply filter kit
Part number 332-00003
1
2
Turn off the compressed air.
Turn off the compressed air.
0 psi
0 psi
* Refer to the Operator Guide for full details.
Replacing the 5 Micron Filter
Unscrew the bowl by pulling the tab
down and turning the bowl to the left.
2
Tab
Bowl
3
Remove the old filter and
Install the new one.
Replacing the 0.01 Micron Filter
Unscrew the bowl by pulling the tab
down and turning the bowl to the left.
2
Tab
Bowl
3
Remove the old filter and
Install the new one.
4 Clean inside the bowl.
5 Replace the O-ring,
if necessary.
6 Reattach the bowl by pushing
it up and turning it to the
right until it clicks.
5 micron
filter
4 Clean inside the bowl.
5 Replace the O-ring,
if necessary.
6 Reattach the bowl by pushing
it up and turning it to the
right until it clicks.
0.01 micron
0.01 micron
0.01 micron
0.01 micron
filter
filter
Replacing the Air Supply Filters
Turn on the compressed air.
7
90 psi
5