Creo Trendsetter NEWS SA Wizualna skrócona instrukcja obsługi - Strona 6
Przeglądaj online lub pobierz pdf Wizualna skrócona instrukcja obsługi dla Drukarka Creo Trendsetter NEWS SA. Creo Trendsetter NEWS SA 9 stron.
Drukuj stronęTrendsetter NEWS SA
!
WARNING: Remove air pressure from the
device before replacing an air filter.*
5 micron filter
0.01 micron filter
Air supply filter kit
Part number 332-00003
1
2
Turn off the compressed air.
Turn off the compressed air.
0 psi
0 psi
* Refer to the Operator Guide for full details.
Replacing the 5 Micron Filter
Unscrew the bowl by pulling the tab
down and turning the bowl to the left.
2
Tab
Bowl
3
Remove the old filter and
Install the new one.
Replacing the 0.01 Micron Filter
Unscrew the bowl by pulling the tab
down and turning the bowl to the left.
2
Tab
Bowl
3
Remove the old filter and
Install the new one.
4 Clean inside the bowl.
5 Replace the O-ring,
if necessary.
6 Reattach the bowl by pushing
it up and turning it to the
right until it clicks.
5 micron
filter
4 Clean inside the bowl.
5 Replace the O-ring,
if necessary.
6 Reattach the bowl by pushing
it up and turning it to the
right until it clicks.
0.01 micron
0.01 micron
0.01 micron
0.01 micron
filter
filter
Replacing the Air Supply Filters
Turn on the compressed air.
7
90 psi
5