Digilent chipKIT uC32 참조 매뉴얼 - 페이지 2

{카테고리_이름} Digilent chipKIT uC32에 대한 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digilent chipKIT uC32 18 페이지.

chipKIT™ uC32™ Board Reference Manual

chipKIT uC32 Hardware Overview

The uC32 has the following hardware features:

1. USB Connector for USB Serial Converter

This connects to a USB port on the PC to provide the communications port for the MPIDE to talk to the

uC32 board. This can also be used to power the uC32 board when connected to the PC.

2. JP3 – Microchip Debug Tool Connector

This connector is used to connect Microchip programmer/debugger tools, such as the PICkit 3. This

allows the uC32 board to be used as a traditional microcontroller development board using the

Microchip MPLAB IDE.

3. J4 – External Power Connector

This is a 5.5mm x 2.1mm barrel connector used to power the uC32 board from an external power

supply. It is wired with the center terminal as the positive supply voltage. The power supply voltage

must be in the range 7V to 15V.

4. Power Supply – 3.3V Regulator

Voltage regulator for the 3.3V power supply. This power supply can provide up to 500mA of current.

Other product and company names mentioned may be trademarks of their respective owners.

Page 2 of 17