Digilock NEXT Sola3 Keypad 제품 설명서 - 페이지 3
{카테고리_이름} Digilock NEXT Sola3 Keypad에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Digilock NEXT Sola3 Keypad 5 페이지. Key managed
Digilock NEXT Sola3 Keypad에 대해서도 마찬가지입니다: 제품 설명서 (9 페이지)
페이지 인쇄
Programming Instructions
Assign a New User Code (for assigned use functionality only)
a.
Press = ` [Manager Code] ` . A two-tone beep will be heard and the green LED will turn on.
b.
Press = [new assigned 4-digit User Code] ` . A two-tone beep will be heard.
c.
Press = [the same new assigned 4-digit User Code] ` . Two sets of two-tone beeps will be heard and the green LED will turn off.
Set Additional Lock Features (for shared use functionality only)
Auto Unlock
When in shared use functionality, each lock can be programmed to auto unlock after a set number of hours. The default setting is OFF
(does not auto unlock).
To Turn on Auto Unlock for Default 12 hours:
a.
Press = ` [Owner Code] ` . The LED will turn on.
b.
Press = 9 3 ` . A two-tone beep will be heard and the LED will turn off.
c.
The lock is set to auto unlock after 12 hours from last use.
To Turn on Auto Unlock for Custom Number of Hours:
a.
Press = ` [Owner Code] ` . The LED will turn on.
b.
Press = 9 5 ` . A two-tone beep will be heard and the LED will remain on.
c.
While the LED is on, enter the number of hours from 1 - 99 then press ` .
d.
Two sets of two-tone beeps will be heard and the LED will turn off.
For example: Press 8` to set the lock to auto unlock after 8 hours from last use.
To Turn off Auto Unlock:
a.
Press = ` [Owner Code] ` . The LED will turn on.
b.
Press = 9 4 ` . A two-tone beep will be heard and the LED will turn off.
Product Guide
Code Managed
Keypad
Shared & Assigned Use Functionality
3