Digilock Numeris Versa 제품 설명서 - 페이지 3
{카테고리_이름} Digilock Numeris Versa에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Digilock Numeris Versa 10 페이지. Keypad
페이지 인쇄
Programming Instructions
Express Register Manager Keys
The Programming Key can quickly program multiple locks to operate with the same Manager Keys.
1
Go to a lock already programmed to operate with the Manager Keys.
Press
=` 61 `
.
The LED will turn on.
3
Insert the Programming Key to program each lock to operate with the
same Manager Keys.
Two sets of two-tone beeps will be heard and the LED will fl ash twice to
indicate successful programming.
*The Programming Key will continue to function in express registration mode until it is used to operate a lock.
Add Manager Keys
Manager Keys can be programmed to the locks at any time.
1
Go to a lock requiring additional
Manager Keys.
Press
=` 55 `
.
The LED will turn on.
Product Guide
2
Insert the Programming Key.
A two-tone beep will be heard.
Keypad
Shared & Assigned Use Functionality
2
Insert the Programming Key.
A two-tone beep will be heard and the LED will turn off.
4a
End express registration mode.*
Go to any programmed lock.
Press
=`
then insert the Programming Key.
Press
=`
then insert the Programming Key again to return the bolt to the
original position.
3
Insert each additional Manager Key
one at a time.
A beep will be heard for each
Manager Key programmed.
4b
4
Insert the Programming Key.
A two-tone beep will be heard and
the LED will turn off.
Repeat above steps for each lock
or follow instructions to Express
Register Manager Keys to quickly
program multiple locks to operate
with the same Manager Keys.
3