Digimax 210 사용자 설명서 - 페이지 5

{카테고리_이름} Digimax 210에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Digimax 210 11 페이지. Programmable thermostat compatible with maxi controller
Digimax 210에 대해서도 마찬가지입니다: 사용자 설명서 (12 페이지)

페이지 인쇄

2. Locate and identify the two option Links 1 and 2. Use a

pair of small wire cutters to cut the appropriate links to

give the required configuration.

3. Cutting Link 1 will give a minimum temperature set point

of 16°C (factory default is 5°C) : in that case, the mini-

mum T° you can set is 16°C. Cut link 2 to display cooling

symbol instead of heating symbol.

4. Replace batteries being sure to observe the correct

polarities. Re-fit to plastic base and tighten retaining

screw. Check unit is functioning as required.

RF DigiMax 210 Rear View

Link 2

Link 1

Cut Link 1 for 16°C minimum set point

Cut Link 2 to display cooling symbol

instead of heating symbol

Batteries

Page 5