Digimax 210 Manual do utilizador - Página 5
Procurar online ou descarregar pdf Manual do utilizador para Termostato Digimax 210. Digimax 210 11 páginas. Programmable thermostat compatible with maxi controller
Também para Digimax 210: Manual do utilizador (12 páginas)
Imprimir página2. Locate and identify the two option Links 1 and 2. Use a
pair of small wire cutters to cut the appropriate links to
give the required configuration.
3. Cutting Link 1 will give a minimum temperature set point
of 16°C (factory default is 5°C) : in that case, the mini-
mum T° you can set is 16°C. Cut link 2 to display cooling
symbol instead of heating symbol.
4. Replace batteries being sure to observe the correct
polarities. Re-fit to plastic base and tighten retaining
screw. Check unit is functioning as required.
RF DigiMax 210 Rear View
Link 2
Link 1
Cut Link 1 for 16°C minimum set point
Cut Link 2 to display cooling symbol
instead of heating symbol
Batteries
Page 5