Crescent C2000E 조립 지침 - 페이지 2
{카테고리_이름} Crescent C2000E에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Crescent C2000E 2 페이지. Body lift
Crescent C2000E에 대해서도 마찬가지입니다: 사용 지침 (2 페이지)
페이지 인쇄BOLTS, NUTS & WASHERS INCLUDED
A
(10) 3/8" x 3" Grd. 6 Hex Head Bolts
B
(1) 1/2" x 3-1/2" Grd. 6 Hex Head Bolt
C
(1) 12mm x 87mm Allen Head Bolt
D
(1) 12mm x 65mm Allen Head Bolt
(2)12mm CenterLock Nut
(10)3/8" CenterLock Nut
(1)1/2" CenterLock Nut
(3) Ball & Pin
TOOLS NEEDED:
Phillips Head Screwdriver
Wrench
Adjustable Wrench
Allen Wrench
E
(24) 3/8" Washer
F
(4) 1/2" Washer
K
(3)Phillips Head
Screws
2
Support
Leg
3
Support
Brace
Leg
Brace
Brace
Support
fig. A
A
E
E
3/8"
A
E
E
3/8"
4
IMPORTANT: Make sure arm
support is in the correct
position. See image below.
Arm
Support
ATTACH SUPPORT TO LEG
1. Turn LEG onto CASTERS.
2. Place SUPPORT onto LEG.
3. Use BOLTS A, 3/8" NUT,
and WASHER E to
secure SUPPORT to LEG.
4. Repeat step 3 three times.
Support
Leg
A
E
E
ATTACH BRACES TO
SUPPORT AND LEGS
1. Attach BRACE to SUPPORT
using BOLTS A, 3/8" NUT,
and WASHER E.
(fig. A)
2. Repeat using using BOLTS A,
3/8" NUT, and WASHER E to
attach BRACE to LEGS.
(fig. B)
A
A
fig. B
Brace
E
E
Leg
E
E
3/8"
3/8"
ATTACH ARM TO SUPPORT
1. Slip ARM between top of
SUPPORT.
2. Use BOLT B, 1/2" NUT, and
WASHER F to secure ARM to
SUPPORT.
Support
Arm
B
F
F
3/8"
1/2"