Crescent C2000E Petunjuk Perakitan - Halaman 2

Jelajahi secara online atau unduh pdf Petunjuk Perakitan untuk Sistem Pengangkatan Crescent C2000E. Crescent C2000E 2 halaman. Body lift
Juga untuk Crescent C2000E: Petunjuk Penggunaan (2 halaman)

Halaman Cetak
BOLTS, NUTS & WASHERS INCLUDED
A
(10) 3/8" x 3" Grd. 6 Hex Head Bolts
B
(1) 1/2" x 3-1/2" Grd. 6 Hex Head Bolt
C
(1) 12mm x 87mm Allen Head Bolt
D
(1) 12mm x 65mm Allen Head Bolt
(2)12mm CenterLock Nut
(10)3/8" CenterLock Nut
(1)1/2" CenterLock Nut
(3) Ball & Pin
TOOLS NEEDED:
Phillips Head Screwdriver
Wrench
Adjustable Wrench
Allen Wrench
E
(24) 3/8" Washer
F
(4) 1/2" Washer
K
(3)Phillips Head
Screws
2
Support
Leg
3
Support
Brace
Leg
Brace
Brace
Support
fig. A
A
E
E
3/8"
A
E
E
3/8"
4
IMPORTANT: Make sure arm
support is in the correct
position. See image below.
Arm
Support
ATTACH SUPPORT TO LEG
1. Turn LEG onto CASTERS.
2. Place SUPPORT onto LEG.
3. Use BOLTS A, 3/8" NUT,
and WASHER E to
secure SUPPORT to LEG.
4. Repeat step 3 three times.
Support
Leg
A
E
E
ATTACH BRACES TO
SUPPORT AND LEGS
1. Attach BRACE to SUPPORT
using BOLTS A, 3/8" NUT,
and WASHER E.
(fig. A)
2. Repeat using using BOLTS A,
3/8" NUT, and WASHER E to
attach BRACE to LEGS.
(fig. B)
A
A
fig. B
Brace
E
E
Leg
E
E
3/8"
3/8"
ATTACH ARM TO SUPPORT
1. Slip ARM between top of
SUPPORT.
2. Use BOLT B, 1/2" NUT, and
WASHER F to secure ARM to
SUPPORT.
Support
Arm
B
F
F
3/8"
1/2"