Diginet RAPIX DGOZ-LLS-M 설치 매뉴얼 - 페이지 5
{카테고리_이름} Diginet RAPIX DGOZ-LLS-M에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Diginet RAPIX DGOZ-LLS-M 8 페이지. Light level sensor with three inputs for pir sensors
페이지 인쇄
RAPIX Lighting Control System
10. Configuration
The RAPIX Light Level Sensor is configured using 'RAPIX Integrator' PC software.
11. Specifications
Input Voltage
Input current
Light Level Measurement Range
Automatic Light Level Maintenance Range
Automatic Light Level Maintenance Tolerance
Light Level sensor Field of view
Operating Temp
Number of PIR connections supported
Maximum distance between eHub and LLS
Maximum distance between LLS and a PIR
IP Rating
Identification LED indicator colour
12. Product dimensions
12Vdc (supplied via RAPIX eHub)
10 mA with no PIRS.
Up to 160 mA fully populated with PIR's.
Each PIR should have a current draw < 50 mA.
A suitably sized eHub power supply should be
used that can handle the total number of PIRs.
1 to 4000 Lux
100 to 1000 Lux when used with RAPIX eHub
10%
180°
0-50°C
3
100m
25m using cat5/cat5e/cat6 cable
IP20
Red
RAPIX Light Level Sensor
5