Cisco 1503 소프트웨어 설명서 - 페이지 12
{카테고리_이름} Cisco 1503에 대한 소프트웨어 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 1503 49 페이지. Cisco systems switch user manual
페이지 인쇄
Command Summary
Commands are defined and described in the format shown below:
show hub information
Syntax:
Mode:
Description:
Definitions of
keywords used in
the command
syntax.
Example of a
command display.
Definitions of fields
that are shown in
command displays.
3-12
Cisco Micro Hub User Guide
The name of the command.
show hub information [hub id]
Guest
What command mode you must be in to enter the command.
Displays information about one or more hubs in a stack.
Command Keyword Definition
• hub id — (Optional) The number of the hub in the stack. An integer
between 1 and 5. To determine the number of the hub, use the position
of the hub in the order from first to last hub connected through the rear
panel IN and OUT ports. If no number is entered, information about
all hubs in the stack will be displayed.
The display appears as follows:
hub>
show
hub
Hub
ID
Type
H/W ver
-------------------------------------------
1
1503
1.0
2
1502
1.0
3
1503
1.0
Command Display Definitions
• Hub ID—Number of the hub in the stack, from top to bottom.
• Type—Model number of the hub: 1502 or 1503.
• H/W ver—Hardware version of the hub.
• F/W ver—Firmware version of the hub.
• Agent—Whether or not the hub contains an SNMP.
How the command is entered.
Keywords in [square brackets] are
optional. Keywords in {curly brackets}
are required. Enter keywords shown in
bold exactly as they appear. Keywords
shown in italics are values that are
provided by you.
info
F/W ver
SNMP-Agent
1.01
Active
1.01
No
1.01
Inactive
Describes the
command. Some
commands may not
require all of the
information shown
here.