Cisco 1503 소프트웨어 설명서 - 페이지 10

{카테고리_이름} Cisco 1503에 대한 소프트웨어 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 1503 49 페이지. Cisco systems switch user manual

Configuring the Hub

Step 3

Basic IP and SNMP configuration is now complete. To return to guest mode, enter exit.

Enter exit a second time to close the current terminal session:

Hub# exit

Hub> exit

Configuring the SNMP Management Station

Make sure that the SNMP management station receives traps from the Micro Hub 1503

(and any Micro Hubs connected to it in a stack) by configuring the management station as

follows:

•

Make sure the management station has entries for all the Micro Hubs in the stack.

•

The entries for the Micro Hubs should have Get Community and Set Community

configured as private.

•

The management station should be able to read SNMP information from the

Micro Hubs, such as port status and traffic counts.

•

The management station should be able to control and manage the Micro Hubs,

including enabling and disabling ports and changing contact information.

3-10

Cisco Micro Hub User Guide

Use the ip trap-manager command to configure the IP address of the SNMP

management station:

Hub# ip trap-manager 1 172.16.20.2