Cisco 1503 Software Manual - Page 10

Browse online or download pdf Software Manual for Switch Cisco 1503. Cisco 1503 49 pages. Cisco systems switch user manual

Print Page
Cisco 1503 Software Manual
Configuring the Hub
Step 3
Basic IP and SNMP configuration is now complete. To return to guest mode, enter exit.
Enter exit a second time to close the current terminal session:
Hub# exit
Hub> exit
>
Configuring the SNMP Management Station
Make sure that the SNMP management station receives traps from the Micro Hub 1503
(and any Micro Hubs connected to it in a stack) by configuring the management station as
follows:
•
Make sure the management station has entries for all the Micro Hubs in the stack.
•
The entries for the Micro Hubs should have Get Community and Set Community
configured as private.
•
The management station should be able to read SNMP information from the
Micro Hubs, such as port status and traffic counts.
•
The management station should be able to control and manage the Micro Hubs,
including enabling and disabling ports and changing contact information.
3-10
Cisco Micro Hub User Guide
Use the ip trap-manager command to configure the IP address of the SNMP
management station:
Hub# ip trap-manager 1 172.16.20.2