Cisco 1503 Посібник з програмного забезпечення - Сторінка 10
Переглянути онлайн або завантажити pdf Посібник з програмного забезпечення для Перемикач Cisco 1503. Cisco 1503 49 сторінок. Cisco systems switch user manual
Друкувати сторінку
Configuring the Hub
Step 3
Basic IP and SNMP configuration is now complete. To return to guest mode, enter exit.
Enter exit a second time to close the current terminal session:
Hub# exit
Hub> exit
>
Configuring the SNMP Management Station
Make sure that the SNMP management station receives traps from the Micro Hub 1503
(and any Micro Hubs connected to it in a stack) by configuring the management station as
follows:
•
Make sure the management station has entries for all the Micro Hubs in the stack.
•
The entries for the Micro Hubs should have Get Community and Set Community
configured as private.
•
The management station should be able to read SNMP information from the
Micro Hubs, such as port status and traffic counts.
•
The management station should be able to control and manage the Micro Hubs,
including enabling and disabling ports and changing contact information.
3-10
Cisco Micro Hub User Guide
Use the ip trap-manager command to configure the IP address of the SNMP
management station:
Hub# ip trap-manager 1 172.16.20.2