Cisco 1548M MICRO SWITCH 빠른 시작 매뉴얼 - 페이지 4
{카테고리_이름} Cisco 1548M MICRO SWITCH에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 1548M MICRO SWITCH 8 페이지. 10/100 cabling and start up
페이지 인쇄
Connect the Switch to Other Network
Devices
Note: Use a straight-through cable to
2
connect two ports when one of the ports is
designated with an X. Use a crossover cable
to connect two ports when both ports are
designated with an X.
Connect the Switch to
Servers, Routers, and
Workstations
•
Connect a Category 3, 4, or 5
straight-through cable to any 10/100
port on the switch and to a 10BaseT
port on the workstation, server, or
router.
•
Connect a Category 5 straight-through
cable to any 10/100 port on the switch
and to a 100BaseTX port on the
workstation, server, or router.
C is co 15
48 M
1x
2x
10/1 00
3x
RAT ING
4x
100 -127
/200 -240
100B T-ON
0.3A /
V~
0.2 50/6
/ 10B T-OF
0 Hz
1
F
2 3 4
5 6 7
1 2 3
8
4 5 6
CON SOLE
7 8
FDU P-O
N / HDU
P-O FF
5x
6x
7x
8x
10/100 network
port (RJ-45)
Ethernet cable
(not supplied)
Maximum cable length:
328 ft (100 m)
Connect the Switch to Hubs
and Other Switches
•
Connect a Category 3, 4, or 5 crossover
cable to any 10/100 port on the switch
and to a 10BaseT port on the target hub
or switch.
•
Connect a Category 5 crossover cable to
any 10/100 port on the switch and to a
100BaseTX port on the target hub or
switch.
10BaseT or
100BaseTX port
(RJ-45)