Cisco 1548M MICRO SWITCH 빠른 시작 매뉴얼 - 페이지 6
{카테고리_이름} Cisco 1548M MICRO SWITCH에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 1548M MICRO SWITCH 8 페이지. 10/100 cabling and start up
페이지 인쇄
Assign IP Information to the Switch
The switch is designed to operate with little
or no user intervention. In most cases, you
can use it with its default settings.
Assign IP information to the switch so that
you can use the Cisco 1548 Switch Manager
web-based interface and the switch can
communicate with local routers and the
Internet.
Contact your system administrator for the
switch IP information, and record it here.
Switch IP address:
Subnet mask:
Default gateway:
From the terminal or PC, enter Y:
1
4
Continue with configuration dialog? Y
Enter the IP address (for example:
2
10.1.105.20):
Enter IP address: 10.1.105.20
Enter the subnet mask (IP netmask)
3
(for example: 255.255.255.0):
Enter IP netmask: 255.255.255.0
Enter the IP address of the default
4
gateway (for example: 10.1.105.254):
Enter IP default gateway: 10.1.105.254
The following information is displayed:
The following configuration command
script was created:
ip address 10.1.105.20 255.255.255.0
ip default-gateway 10.1.105.254
!
end
Enter Y:
5
Use this configuration? Y
The following information is displayed:
Building configuration...
Use the enabled mode 'configuration'
command to modify this configuration.
Press RETURN to get started.
Press Return.
6
Exit from the terminal session.
7
You can now display the Cisco 1548 Switch
Manager.