Cisco 2960-C 설치 매뉴얼 - 페이지 7

{카테고리_이름} Cisco 2960-C에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 2960-C 37 페이지.
Cisco 2960-C에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (25 페이지)

Chapter 2

Switch Installation

Figure 2-1

Screw template 3

Screws

Peel the adhesive strip off the bottom of the screw template, and attach it to the top of the desk or shelf.

Step 3

Use a 0.144-inch (3.7 mm) or a #27 drill bit to drill a 1/2-inch (12.7 mm) hole in the three screw

Step 4

template slots.

Insert three screws in the slots on the screw template, and tighten them until they touch the top of the

Step 5

screw template.

Remove the screw template from the desk or shelf.

Step 6

Place the switch onto the mounting screws, and slide it forward until it locks in place. See

Step 7

Warning

To prevent airflow restriction, allow clearance around the ventilation openings to be at least:

3 in. (7.6 cm) Statement 1076

OL-23803-02

Installing the Mounting Screws on Top of a Desk or a Shelf

Desk or shelf

Catalyst 3560-C and 2960-C Switch Hardware Installation Guide

Mounting the Switch

Figure

2-2.

2-7