Cisco 2960-C 설치 매뉴얼 - 페이지 9

{카테고리_이름} Cisco 2960-C에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 2960-C 37 페이지.
Cisco 2960-C에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (25 페이지)

페이지 인쇄
Cisco 2960-C 설치 매뉴얼
Chapter 2
Switch Installation
Figure 2-3
1
Desk or shelf
2
Screw template
Use a 0.144-inch (3.7 mm) or a #27 drill bit to drill a 1/2-inch (12.7 mm) hole in the three screw
Step 4
template slots.
Insert three screws in the slots on the screw template, and tighten until they touch the top of the screw
Step 5
template.
Remove the screw template from underneath the desk or shelf.
Step 6
Place the switch upside down onto the mounting screws, and slide it forward until it locks in place. See
Step 7
Figure
To prevent airflow restriction, allow clearance around the ventilation openings to be at least:
Warning
3 in. (7.6 cm) Statement 1076
OL-23803-02
Installing the Mounting Screws Under a Desk or Shelf
1
2
3
3
Screws
4
Adhesive
2-4.
4
3
Catalyst 3560-C and 2960-C Switch Hardware Installation Guide
Mounting the Switch
2-9