Cisco 2960-C 시작하기 매뉴얼 - 페이지 12

{카테고리_이름} Cisco 2960-C에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 2960-C 25 페이지.
Cisco 2960-C에 대해서도 마찬가지입니다: 설치 매뉴얼 (37 페이지)

Installing the Switch

Catalyst 3560-C and 2960-C Switch Getting Started Guide

See the

"Accessing Help Online" section on page 22

documentation.

This section covers desk-mounting procedures. As examples, all the illustrations

show the Catalyst 2960CPD-8PT-L switch. For alternate mounting procedures,

such as installing the switch in a rack, under the desk, on a wall, or for using a

mounting tray and magnet, see the Catalyst 3560-C and 2960-C Switch Hardware

Installation Guide on Cisco.com.

Number-2 Phillips screwdriver

•

Drill with a #27 drill bit (0.144-inch [3.7 mm])

•

Before installing the switch, these guidelines must be met:

Clearance to front panels is such that the LEDs can be easily read.

•

Power cord reaches from the power outlet to the connector on the switch.

•

Cabling is away from sources of electrical noise, such as radios, power lines,

and fluorescent lighting fixtures.

Temperature around the unit does not exceed 113°F (45°C). If the switch is

•

installed in a closed or multirack assembly, the temperature around it might

be greater than normal room temperature.

Humidity around the switch does not exceed 95 percent.

•

Altitude at the installation site is not greater than 10,000 feet.

•

Catalyst 3560-C and 2960-C Switch Getting Started Guide

for a list of supporting

OL-23802-02