Cisco 2960-C 시작하기 매뉴얼 - 페이지 13

{카테고리_이름} Cisco 2960-C에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 2960-C 25 페이지.
Cisco 2960-C에 대해서도 마찬가지입니다: 설치 매뉴얼 (37 페이지)

Catalyst 3560-C and 2960-C Switch Getting Started Guide

Installation Warning Statements

Warning

OL-23802-02

Airflow around the switch and through the vents must be unrestricted. We

•

strongly recommend that you allow at least 3 in. (7.6 cm) of clearance from

the left, right, and top sides of the switch to avoid any flow blockage. If you

are installing the switch in a rack, allow at least 1.75 in. (4 cm) of empty rack

space above each switch.

When placing the switch on a flat horizontal surface, we strongly recommend

•

that you attach the rubber feet to the switch.

For 10/100/1000 fixed ports, cable lengths from the switch to connected

•

devices can be up to 328 feet (100 meters).

For cable lengths for small form-factor pluggable (SFP)-module connections,

•

see the hardware installation guide on Cisco.com and the module

documentation.

This section includes the basic installation warning statements. Translations of

these warning statements appear in the Regulatory Compliance and Safety

Information for the Catalyst 3560-C and 2960-C Switches document on

Cisco.com.

To prevent bodily injury when mounting or servicing this unit in a rack, you must

take special precautions to ensure that the system remains stable. The

following guidelines are provided to ensure your safety:

This unit should be mounted at the bottom of the rack if it is the only unit in the

rack.

When mounting this unit in a partially filled rack, load the rack from the bottom

to the top with the heaviest component at the bottom of the rack.

If the rack is provided with stabilizing devices, install the stabilizers before

mounting or servicing the unit in the rack. Statement 1006

Class 1 laser product. Statement 1008

Catalyst 3560-C and 2960-C Switch Getting Started Guide