Cisco 4503 - Catalyst Switch 개요 - 페이지 31

{카테고리_이름} Cisco 4503 - Catalyst Switch에 대한 개요을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 4503 - Catalyst Switch 46 페이지. Line cards
Cisco 4503 - Catalyst Switch에 대해서도 마찬가지입니다: 설명 (2 페이지), 사용 설명서 (2 페이지), 데이터시트 (23 페이지)

페이지 인쇄
Cisco 4503 - Catalyst Switch 개요
Chapter 1
Module Overview and Specifications
Figure 1-28 WS-X4306-GB 6-Port Gigabit Ethernet Switching Module

WS-X4506-GB-T

Note
78-13267-06
The WS-X4506-GB-T 6-port Gigabit Ethernet switching module (see
Figure
1-28) has the following specifications:
Specification
Module type
Port duplex mode
Port speed
Number of ports
Connector type
Cable type
Power over Ethernet
There are six10/100/1000BASE-T and six 1000BASE-X SFP Gigabit Ethernet
connectors present. Use the select media sfp | rj45 command to set whether a
specific port number uses the SFP or RJ-45 connector. SFP is the default.
Description
10/100/1000BASE-T Fast Ethernet with IEEE802.3af
PoE or 1000BASE-X SFP Gigabit Ethernet switching
module
Half or full duplex mode
10, 100, or 1000 Mbps
6 total
RJ-45 (See
Figure 2-1 on page
LC type (See
Figure 2-9 on page
Category 5 UTP (1000BASE-T)
MMF or SMF (1000BASE-X, LX fiber-optic cable
only)
Up to 15.4 W per powered device on all 6 ports
Catalyst 4500 Series Module Installation Guide
Gigabit Ethernet Switching Modules
2-2.)
2-6.)
1-31